Connect Brother Printer to WiFi: Complete Setup Guide
Before Connecting Your Brother Printer to WiFi
Keep these details ready before starting:
- Your WiFi network name (SSID).
- Your WiFi password or network key.
- A working wireless router.
- Your Brother printer’s model number.
- A computer or smartphone, if your setup method requires one.
Important: Check your printer’s specifications to confirm that it supports wireless networking. Not every Brother printer has built-in WiFi.
Methods to Connect Your Brother Printer to WiFi
Method 1: Connect Brother Printer to WiFi Using the Setup Wizard
This is a common method for Brother printers with a display and navigation buttons.
- Turn on your Brother printer.
- Press Menu or open Settings on the printer’s display.
- Select Network, then choose WLAN or Wi-Fi.
- Select Setup Wizard.
- If prompted, enable WLAN.
- Wait for the available wireless networks to appear.
- Select your WiFi network name (SSID).
- Enter your WiFi password carefully.
- Confirm the settings and allow the printer to connect.
When the screen displays Connected, the wireless connection is established. Menu names can vary by Brother model, so check your model’s manual if the options look different.
Method 2: Connect Brother Printer to WiFi Using WPS Button
Want to connect a Brother printer to WiFi without entering any password? WPS (Wi-Fi Protected Setup) may make the process easier.
- Confirm that your router has a physical WPS button and that your printer supports WPS.
- Place your Brother printer near the router.
- Open the printer’s Network or WLAN settings.
- Select WPS, WPS/AOSS, or Push Button, depending on your model.
- When prompted, press the WPS button on your router.
- Follow any remaining instructions on the printer display.
- Wait for the connection confirmation.
A connected message or wireless indicator usually confirms success. The WPS connection window is time-limited, so follow the printer’s instructions promptly.
Method 3: Connect Brother Printer to WiFi Using a Computer
If your Brother printer does not have an easy-to-use display, use the Brother wireless setup installer to configure the connection.
- Visit Brother’s official website at setup.brother.com.
- Enter your printer model number.
- Download the recommended setup software for your operating system.
- Open the installer and follow the on-screen instructions.
- Select Wireless Network Connection (Wi-Fi) when asked for a connection type.
- Choose your WiFi network and enter its password if prompted.
- Complete the installation.
Some models may require a temporary USB connection during setup. Follow the instructions shown on your specific printer rather than just assuming every model uses the same process.
Method 4: Connect Brother Printer to WiFi on Mac
Mac users can also configure a Brother printer wirelessly.
- Download the appropriate printer software from Brother’s official website.
- Open the downloaded installer.
- Follow the Wireless Device Setup or installation instructions.
- Select your wireless network and enter its password when requested.
- Complete the setup.
- On your Mac, open System Settings > Printers & Scanners.
- Select your Brother printer or add it if it is not listed.
Print a test page to confirm that your Mac can communicate with the printer.
Method 5: Connect Brother Printer to WiFi Using Your Phone
You can also set up compatible Brother printers using a smartphone.
- Connect your phone to your home WiFi network.
- Install the Brother Mobile Connect app or the app recommended for your printer model.
- Turn on the printer and open the app.
- Select the option to add or set up a printer.
- Follow the on-screen wireless setup instructions.
- Select your network and enter the password if requested.
App features and setup options depend on your exact printer model and phone. Check the model’s compatibility before installing the app.
Brother Printer Not Connecting to WiFi? Try These Fixes
If your Brother printer fails to connect, check these common causes:
- Incorrect WiFi password: Re-enter the password carefully, paying attention to capital letters and special characters.
- Weak wireless signal: Move the printer closer to your router during setup.
- Wrong network: Make sure you select your actual home or office network, not a guest network.
- Router compatibility: Check your printer’s wireless specifications for supported WiFi bands and security settings. Some models support only 2.4 GHz networks.
- Old network settings:If you changed your router or password, run the wireless setup again.
- Temporary connection issue:Restart the printer and router, then retry the setup.
If the Brother printer still cannot connect, check its network configuration or wireless connection report, if your printer model provides one.
How to Check If Your Brother Printer Is Connected to WiFi?
After setup, check the printer’s display for a wireless connection indicator or any connected message. You can also print a network configuration report if your printer model offers that feature.
Next, send a test print from your computer or smartphone. If the document prints successfully, then your printer is ready for wireless printing.
Final Thoughts
Learning how to connect a Brother printer to WiFi is easier when you use the correct method for your model. The Wireless Setup Wizard is a convenient option for printers with a display, while WPS and Brother’s installation software offer alternatives. Once connected, test a print from your computer or phone to make sure that everything works properly.
Frequently Asked Questions
Q1: Can I connect my Brother printer to WiFi without a USB cable?
Ans: Yes, if your model supports wireless networking, you can usually use its Wireless Setup Wizard or WPS button. Some models may require a temporary USB connection for computer-based configuration.
Q2: Where can I find my Brother printer’s WiFi password?
Ans: Your printer uses your router’s password, not a separate printer password. Check the router label or the network settings saved on a connected device.
Q3: Why can’t my Brother printer find my WiFi network?
Ans: The printer may be too far from the router, your network may use an unsupported frequency band, or the router may not be broadcasting its network name. Check your model’s wireless specifications and router settings.
Q4: How do I reconnect my Brother printer after changing my WiFi password?
Ans:Open the printer’s Network or WLAN settings, start the Wireless Setup Wizard, select your network, and enter the new password.

