Brother Printer Won’t Connect to Wi-Fi? What to do?
A Brother printer that won’t connect to Wi-Fi rarely means the printer is broken. In most cases, the cause may be a network mismatch, an incorrect password, outdated drivers, or a router that has changed its settings.
Below, you will get the fixes from the fastest, most likely to work first, and the deeper resets you may only need if the quick fix doesn’t resolve it. Perform them in order, and you’ll usually get the printer printing again before you reach the last fix.
Perform These Quick Checks First
Before touching any settings, take a proper look at these network and physical checks:
1. Is your printer in a good range from the router? Walls, metal cabinets, and microwaves can easily weaken a 2.4 GHz signal. Move your Brother printer closer to the router temporarily to check whether the signal improves.
2. Is your WiFi actually working? Connect a phone or laptop to the same WiFi network for the test. If that fails too, the problem is with your router or ISP, not the printer itself.
3. Have you changed your router password or network name recently? New router connections, ISP switches, and router resets can all impact a fresh SSID or password that your printer doesn’t know about yet.
4. Is the printer’s WiFi connection even turned on? Some Brother models work with wireless disabled until you do the setup wizard for the first time.
5. Have you restarted your printer and router?Restart the router first and wait until the Wi-Fi network is available. Then turn on your printer and try connecting again.
If none of these helps you fix the problem, move on to the causes below.
Unexpected Common Reasons Why Brother Printer Is Not Connecting to WiFi
Here are a handful of things responsible for the majority of Brother WiFi failures:
- Network Mismatch: Your printer can only connect to 2.4 GHz, and your router is giving 5 GHz under the same name. However, the Wi-Fi band support varies by Brother printer model. Check your printer’s specifications before changing your router settings.
- A Typo in the Password:Wireless passwords are very case-sensitive. Entering one wrong character through your printer’s small keypad or touchscreen is easy to miss.
- The Printer is Trying to Connect to an Old Network:If you’ve just moved, replaced, or reset your router, then the printer may still be connected to the previous network’s credentials.
- Outdated Printer Drivers or Firmware: Old or outdated drivers and firmware on your computer are free to update but are often overlooked.
- Enabled Firewall or Antivirus Software:It may be blocking the printer’s IP address, so Windows can report your printer as “offline” even though it’s connected to WiFi just fine.
- The Router Needs a Restart:Routers running for months can easily develop some connection issues that have nothing to do with the printer.
Fixes That Actually Resolve the WiFi Connection Issue
A. Try to Reconnect Through the Printer’s Own Setup Wizard
- Go to the printer’s control panel, look for Settings (or Menu) > Network > WLAN (Wi-Fi) > Setup Wizard.
- The printer will automatically scan and display a list of all nearby network names (SSIDs).
- Select your network name if you see it listed twice.
- Pick the network your other devices connect to, not any other 5 GHz version if your model doesn’t support it.
- Type your WiFi password carefully using the on-screen keyboard and double-check it before confirming.
- The printer will display a connecting message.
- Wait for the printer to confirm the connection. If available, check the wireless status or print a WLAN report to verify that the printer is connected successfully.
Note: Menu names and setup options may vary depending on your Brother printer model.
B. Connect using the WPS button
- Press and hold the WPS button on your router for a few seconds.
- After two minutes, press the wireless setup button on the back of the Brother machine for less than two seconds.
- If you have a touchscreen model, use Network > WLAN > WPS/Push Button from the menu instead.
- Follow your printer’s user guide for the correct button sequence and timing, as these can differ between models.
- Once you are connected, check the printer’s wireless status or display for confirmation.
- Do not rely on a solid blue light unless your specific model uses that indicator to confirm a successful connection.
C. Fix the Error through Windows
- Update the Brother printer driver to the latest available version.
- Download and run the Brother’s Network Connection Repair Tool from the Brother official website.
- Run the tool with administrator rights.
- Confirm both your Brother printer and computer are connected to the same Wi-Fi network.
- Let it find your printer and sync its current IP address with the printer driver.
- If the printer still shows Offline in Windows, then go to Settings > Devices > Printers & scanners.
- Remove the Brother printer and add it again.
- Allow Windows to detect your printer as a new network printer.
D. Reset the Printer’s Network Settings
This is completely different from resetting the computer’s network settings, and it’s specific to the printer itself, so use it only if the steps above haven’t worked:
- Open the Control Panel.
- Go to Settings > All Settings > Network > Network Reset.
- Confirm when it prompts on your screen.
The machine will reboot. Its wireless and wired settings will return to back to default, so you’ll need to run the Setup Wizard again afterwards.
Important:The exact reset menu varies by model. A network reset may erase saved network details and other network configurations, so check your printer’s user guide before proceeding.
Conclusion
If your Brother Printer won’t connect to Wi-Fi, start with the network name, password, and a 2.4 GHz connection before trying any deeper fixes. Reconnect it through the Setup Wizard or WPS. You can also use Brother’s Network Connection Repair Tool if Windows cannot find your Brother printer. If nothing works, try to reset the printer’s network settings and set up your Wi-Fi again.
Before resetting, confirm that your printer supports the Wi-Fi band and security settings used by your router. Following the instructions for your exact Brother model can help you avoid unnecessary changes and get back to printing sooner.
FAQs
Q1: Why won’t my Brother printer find my WiFi network at all?
Ans: The most common reason behind it is that it’s a 5 GHz-only signal and your printer only supports 2.4 GHz. Other possible causes include a weak signal, disabled wireless settings, or incompatible router security settings. Check your printer’s specifications and confirm that its supported Wi-Fi band is enabled on your router.
Q2: Will my Brother printer work on 5 GHz WiFi?
Ans: It depends on your Brother printer model. Most Brother models support 2.4 GHz network only. Newer models provide dual network bands, but you have to check your specific model’s spec sheet to be sure.
Q3: I just fixed the WiFi connection, but my Windows shows the Printer Offline. Now what?
Ans: Don’t worry, this is a Windows-to-printer connection issue instead of a WiFi issue. You need to try the Network Connection Repair Tool mentioned above, or read our Brother Printer Offline guide to learn how to fix it.
Also check that your printer and computer are on the same local network and that your firewall is not blocking communication.
Q4: Why do I see my WiFi light blinking on my Brother printer?
Ans:You are seeing the blinking light because it may have lost its wireless link entirely. However, blinking patterns and indicator meanings vary by model. A blinking light may indicate that the printer is searching for a network or has not completed the connection. Check the printer’s display or user guide to identify the exact status before running the Setup Wizard again.

