Brother Printer Won’t Scan? 10 Ways to Fix It
A failure in scanning does not mean the scanner is damaged at all. Some common reasons are a missing scanner driver, an unstable USB or Wi-Fi connection, the wrong scanning source, or security software that is blocking the connection.
Try the fixes below in order.
But first, find out whether the failure is coming from the computer, the scan button, or both. This will help you find the real cause. If the computer scanning works but the control-panel button fails, you need to check destination settings. If none of the methods work, check the driver, connection, and scanner detection first.
Fixes That Actually Work For You
Fix 1: Check the scanner for any errors
Start by checking the device first.
- Check the display for any paper jams, open-cover warnings, or any other error messages.
- Position the page correctly on the glass or in the automatic document feeder (ADF).
- Close the scanner cover or feeder properly.
- Turn the Brother machine off, wait 15 seconds, and turn it on again.
- Restart your computer.
Fix 2: Verify the USB or WiFi connection
For a USB connection:
- Disconnect and reconnect the cable at both ends.
- Connect directly to the computer, not through a hub, dock, or extension.
- Try another USB port or a known working cable.
For any Wi-Fi or Ethernet connection:
- Confirm the Brother machine is connected to the network.
- Make sure the computer uses the same local network.
- Temporarily disconnect a VPN for testing because it can block local device discovery.
Fix 3: Test with Brother iPrint&Scan
- Open Brother iPrint&Scan on Windows or Mac.
- Select your Brother model.
- Check whether it appears as ready.
- Place a page on the scanner and run a test.
If the machine is missing, recheck its connection and selection. If the app cannot find it, continue with the driver and network checks.
Fix 4: Install the Correct Printer Driver
A printer driver and scanner driver are not always interchangeable. Your computer may print while missing the software required to scan.
- Find the full model name on the machine.
- Visit Brother’s official website and open Downloads for that model.
- Select your exact operating system and version.
- Install the Full Driver & Software Package or scanner driver offered for your model.
- Restart the computer and test again.
Fix 5: Select the correct Brother TWAIN or WIA source
Some Windows scanning applications let you choose a scanner source. An incorrect selection can prevent communication with your Brother device.
- Open the scanning application.
- Find its scanner, source, or device selection setting.
- Select the Brother TWAIN or WIA driver if listed.
- If neither appears, install the correct Brother scanner driver.
Fix 6: Check Scanner Detection in Windows
- On Windows 11,open Settings > Bluetooth & devices > Printers & scanners and select your Brother device. You can also test with the Windows Scan app, if installed.
- On Windows 10, open Settings > Devices > Printers & scanners and confirm that the machine is listed. If it is not detected as a scanner, install the model-specific Brother scanner software and reconnect the device.
Fix 7: Confirm the network scanning address
For Wi-Fi or Ethernet scanning, the software may be using an outdated network address.
- Check the machine’s network status or print its Network Configuration Report, if it is available.
- Confirm that it has a valid IP address.
- In Brother scanner settings, select the machine by its current address if that option is available.
- If the router or Wi-Fi name changed, reconnect the machine to the correct network.
Fix 8: Check the firewall and VPN settings
- First, test scanning through Brother iPrint&Scan.
- If the machine appears but scanning fails, check your firewall’s allowed-app settings and permit Brother scanning software on your trusted private network.
- If you use third-party security software, follow its instructions for allowing local network communication.
- Disconnect a VPN only as a test, then restore it.
Fix 9: Resolve “No Pc Found” When Scanning From the Printer
If scanning works from Brother iPrint&Scan but pressing the Scan button on your device shows “No PC Found” or “Check Connection”, the destination setting may be missing.
- Open Brother iPrint&Scan or the applicable Brother utility.
- Check Scan to PC or Scan button settings.
- Select your computer as the destination.
- Confirm both devices share the same network.
- Test the button again.
Fix 10: Remove and Re-add the Scanner
If the other fixes fail for you, remove the current Brother printer from your computer and install it again.
On Windows,open Printers & scanners in Settings, choose your Brother device, and select Remove. Reboot the computer, install the correct Brother software, and re-add the printer again.
On Mac,open System Settings > Printers & Scanners, click on the device, and remove it. Add it again using the discovery options. Install model-specific Brother software if required.
Final Thoughts
If your Brother printer won’t scan, begin by checking its display, connection, and Brother iPrint&Scan. Then check the scanner driver, TWAIN or WIA source, network settings, and firewall settings. Reinstall the device only after the simple checks fail. These steps will help to resolve many scanning problems without the need to replace a working machine. Always follow instructions and download for your exact model.
Frequently Asked Questions
Q1: Why can my Brother printer print but not scan?
Ans: Printing and scanning use different software components. A missing TWAIN or WIA driver, wrong scanner selection, or a blocked network connection can easily stop scanning while printing continues.
Q2: Why won’t my Brother printer scan to my computer over WiFi?
Ans: The devices you are using may be on different networks, the scanner may be using an outdated IP address, or a firewall or VPN is blocking it. You need to check the network and then test with Brother iPrint&Scan.
Q3: Why does my Brother printer say No PC Found?
Ans:The device may not detect the correct computer destination. You need to confirm that both devices share the same network and also check the Scan to PC settings for your exact model.
Q4: What to do if my Brother Scanner is not detected on Mac?
Ans:You need to check the USB or Wi-Fi connection, confirm that macOS lists the device in Printers & Scanners, and install the compatible Brother software for the model and macOS version.

