Brother Printer Not Connecting to Your Computer

Brother Printer Not Connecting to Computer? Find the Real Problem

A Brother printer can be switched on and ready to print, yet your computer may still fail to detect it. You might see an offline message, see that the printer is missing from the device list, or send a document that never prints. These problems can result from a loose USB cable, a WiFi connection issue, an incorrect printer setting, or an outdated printer driver.Before reinstalling software or changing advanced settings, try these eight troubleshooting fixes to identify the cause and restore the connection.

Why Is Your Brother Printer Not Connecting to Your Computer?

Several causes can prevent your Brother printer from communicating with your computer. Some common causes include:

  • A loose, damaged, or incorrectly connected USB cable.
  • The printer and computer being connected to different Wi-Fi networks.
  • An offline printer, paused print job, or incorrect printer selection.
  • A missing, outdated, or incompatible printer driver.
  • A router restart, changed Wi-Fi password, or operating system update.
  • A stuck print queue or temporary communication error.

Start by checking how your printer connects to the computer. This helps you narrow down the cause before changing software or network settings.

How to Fix a Brother Printer That Won’t Connect to Your Computer

Fix 1: Check the Physical Connection

Start with the basic physical or wireless link. If you are using the USB cable, a loose connection at the end can stop the communication. With Wi-Fi, the printer and computer need to use the same network.

  • Disconnect the USB cable and plug it into both devices. Try another USB port if it is available.
  • For any wireless setup, check the Wi-Fi symbol or network information on the printer.
  • Make sure that the computer is using the same Wi-Fi network, not any random guest network.

If the printer uses USB, connect it directly to the computer rather than through a USB hub while testing. If it uses Wi-Fi, check whether the printer reports a successful network connection.

Remember that being connected to Wi-Fi does not always mean the computer can communicate with the printer.

Fix 2: Restart Devices and Refresh Connection

A restart can clear any communication session that has become stuck.

  • Turn off the printer and wait about 30 seconds.
  • Restart the computer too.
  • If the printer uses Wi-Fi, restart the router, then give the network a few minutes to return.
  • Turn the printer back on after the network is stable.
  • Wait until it is ready.

Send a test page after all devices have restarted. If the printer remains unavailable, move to the next check rather than repeatedly restarting everything.

Fix 3: Select the Correct Printer

If several printers are saved on your computer, a similar name may be selected by mistake.

  • Open the computer’s printer settings.
  • Find the Brother printer you normally use.
  • Check that it is selected for the current job.
  • Remove or ignore old Brother printer entries that are no longer used.
  • Send a test document.

On Windows 11, open Settings, select Bluetooth & Devices, and choose Printers & Scanners. Select your Brother Printer to review its status and available options. On a Mac, open System Settings and select Printers & Scanners.

If you see duplicate entries, check which one matches your current connection before removing anything. An old printer entry may use a different port or network address.

Fix 4: Clear a Stuck Print Queue

A failed document can remain in the print queue and stop any newer jobs from reaching the printer.

  • Open the printer’s current print queue.
  • Cancel documents that are stuck, duplicated, or no longer needed.
  • Send one document.
  • If a job refuses to disappear, restart the computer and printer, then check again.

On Windows, open the Brother printer’s queue through Settings > Bluetooth & devices > Printers & scanners, then select the printer and open its queue. On a Mac, open System Settings > Printers & Scanners, select the printer, and open the queue if available.

If the queue repeatedly gets stuck, check whether a particular document causes the issue. A damaged file or an unusual print setting can sometimes prevent one job from completing.

Fix 5: Check Printer Error Messages and Status

Check the printer for an error, offline message, open cover warning, or paper problem.

  • Check for paper jams and remove loose paper carefully.
  • Make sure the paper tray is loaded correctly.
  • Close every printer cover firmly.
  • Check for low or empty ink or toner if the printer reports a warning.
  • Look for error lights or messages and follow the instructions shown.

Also check whether the printer is paused or marked as offline on your computer. If an error code appears on the printer’s display, consult the official Brother manual for your exact model because error meanings can vary.

Fix 6: Repair Driver and Software Problems

The computer needs the correct Brother software or driver. If it is missing, damaged, outdated, or linked to an old setup, communication may fail.

  • Download the latest software and driver package for your exact Brother printer model from Brother’s official site.
  • Install the package using the recommended setup process.
  • If an old Brother printer entry is confusing, remove it before setting up the printer again.
  • Try printing a test page.

Visit the official Brother website and search for your printer’s exact model number. Select your operating system and download the compatible driver or full software package if one is available.

If the problem started after a Windows or macOS update, check driver compatibility before reinstalling anything. Avoid third-party driver download websites, and follow Brother’s instructions for your specific model.

Fix 7: Repair Wireless Network Setup

A wireless connection can break after the router name, password, or network settings change.

  • Open the network or Wi-Fi settings on the Brother printer.
  • Select your current wireless network.
  • Enter the correct Wi-Fi password carefully.
  • Wait for the printer to confirm the connection.
  • Print a network or connection report if your model provides one.
  • Check whether the printer now appears on the computer.

If the printer cannot find your network, move it closer to the router temporarily and check that the router’s wireless settings are compatible with your printer. Some models support only certain Wi-Fi bands or security settings, so consult the model’s network setup guide.

If the printer reports that it is connected but the computer cannot find it, check whether both devices are on the same local network. Guest network isolation or router settings may prevent devices from communicating even when both have internet access.

Fix 8: Test the Connection and Isolate the Remaining Problem

Once the connection looks correct, test it with something small.

  • Choose a short document with simple text.
  • Send only one print job.
  • Watch for a response.
  • If nothing happens, check the queue.
  • If the printer responds, try your original document again.

You can also print a test page from your computer’s printer settings. If the test page prints successfully but your original document does not, the problem may be related to the file, application, or print settings rather than the printer connection.

What to Do If Your Brother Printer Is Still Not Detected?

If none of the eight fixes work, try removing and adding the printer again. Before doing so, make sure you know whether it connects through USB or Wi-Fi and have any necessary network details ready.

On Windows:

Open Settings > Bluetooth & devices > Printers & scanners. If your Brother printer is listed, select it and review its options. If necessary, remove it and select Add device to set it up again. The available options may differ by Windows version.

On a Mac:

Open System Settings > Printers & Scanners. Select the Brother printer and remove it only if necessary, then use the option to add a printer. Follow the setup instructions for your model and connection type.

After adding the printer, confirm that you selected the correct device and connection method. If it still does not appear, check the manufacturer’s support instructions or investigate whether the USB port, network, or printer hardware needs further attention.

Final Thoughts

When a Brother printer will not connect to a computer, start with the basics instead of assuming the printer has failed. Check the USB or Wi-Fi connection, select the correct printer, clear stuck print jobs, inspect the printer for errors, and verify that the correct driver is installed. Work through each step in order so you can identify the cause without changing unnecessary settings.

If the printer still will not connect, check whether your computer detects it and follow the setup instructions for your exact Brother model. Reinstall the software only when necessary, and contact Brother if the problem continues.

FAQs

Q1: Why does my Brother printer say it is connected but will not print?

Ans:The printer may be selected incorrectly, blocked by a stuck print job, or affected by a driver or communication problem. Check the selected printer, clear the queue, and send a test page to identify where the problem occurs.

Q2: Can a bad USB cable stop my Brother printer from connecting?

Ans:Yes, a damaged or loose USB cable can interrupt communication. Reseat both ends, try another USB port, or test a compatible replacement cable.

Q3: Why did my Brother printer stop connecting after a router change?

Ans:The printer may still be configured to use the old Wi-Fi network name or password. Open its network setup options and reconnect it using the current network details.

Q4: Do I need to reinstall my Brother printer software?

Ans:Not always. Reinstall the software if the driver or setup is damaged, outdated, or linked to the wrong printer. Download the appropriate software for your exact model from Brother’s official website.

Q5: Why is my Brother printer not showing up on Windows 11?

Ans:Your computer may not detect the printer because of a loose USB connection, incorrect Wi-Fi setup, or a missing driver. Open Settings > Bluetooth & Devices > Printers & Scanners to check whether it appears, then follow the setup instructions for your model if it is missing.

Q6: Why isn’t my Brother printer connecting to Wi-Fi?

Ans:The printer may be using an old network password, have lost its connection, or be incompatible with certain router settings. Check the printer’s wireless setup and reconnect it to the correct network using the instructions for your model.

Author

  • Johannes

    I'm Johannes, the founder of PrinterPrints.com. I share simple, easy-to-follow guides to make everyday printing easier. My goal is to explain common printer problems in clear language so readers can understand what went wrong and learn how to get their printers working again.