Fix HP Printer Won’t Connect to WiFi With a Step-by-Step Guide
Start From Here: What Your Printer Is Trying to Tell You
Before you reset anything, take a look at your printer itself. It usually gives you a good hint where the problem is.
Verify the Wireless Light or WiFi Icon:
- If the Light is Solid blue:The printer is connected to a network. If you are still unable to print, your computer can be on a different network, or the problem is on your computer’s side. Scroll down to the section on printers that are connected but still show offline.
- If the wireless light is blinking or off:The printer may not be connected to your Wi-Fi network, or wireless setup may need attention. Check your model’s HP guide to confirm what the indicator means.
- If it Blinks Right After You Reset the Network Settings: It is in WiFi setup mode, and the printer is waiting for you to re-add it. Some models can blink a purple or pulsing status light instead.
Why Your HP Printer Won’t Connect to WiFi?
Most HP printer WiFi problems are caused by one of these common issues:
- Incorrect WiFi Network:The printer is still connected to an old WiFi name or password.
- Unsupported WiFi Band: Some HP printers only support 2.4 GHz, while others support both 2.4 GHz and 5 GHz.
- Router Security:WPA3-only settings may not work with older printers.
- Different Networks:Your printer and computer may be connected to different or guest networks.
- USB Cable Connected:A USB connection can interfere with WiFi setup.
- Weak Signal:Distance, walls, and other devices can weaken the WiFi connection.
- Setup Mode Expired: HP WiFi setup mode can time out before you finish connecting.
- MAC Filtering: Your router may be blocking the printer from joining the network.
- Changed WiFi Password: If you recently changed your router password or network name, you may need to reconnect the printer using the new details.
Quick Fixes for an HP Printer That Won’t Connect
Try these fixes in order. After each step, check whether your printer reconnects before moving to the next one. You do not need to perform every reset if an earlier fix works.
Fix 1: Restart All the Connected Devices in Order
It may sound simple, but restarting your devices in the right sequence can help the printer connect to WiFi.
- Press the printer’s power button to turn it off.
- If the power button does not work as expected, pull the power cord.
- Shut down your computer or phone you are printing from.
- Restart the router and wait for the internet to work again.
- Power on the printer.
- If the printer is plugged into a power strip, plug it into a wall outlet.
- Reboot your computer or phone.
- Check that your computer or phone and printer are connected to the intended network. If the printer is still disconnected, continue to the next fix.
Fix 2: Check Your WiFi Network, Password, and USB Connection
Check these common problems before resetting your printer’s network settings.
- Is the Device Connected to Your Main WiFi? Confirm the network name on your computer or phone. A guest network doesn’t work, and neither does a network named DIRECT-xx-HP with the printer model at the end.
- Is the USB Cable Connecting the Printer to a Computer?If you want to print over WiFi, unplug the USB cable immediately.
- Are Your HP Printer and Router Close to Each Other?HP suggests you need to keep them both within about 26 feet (8 meters) of the router or a range extender. During setup, keeping both in the same room is even better.
- Is the Internet Connection Actually Working? Browse a website through your phone. If pages won’t load, restart the router. However, a printer may connect to a local WiFi network even when the internet is unavailable.
- Did You Enter the Right Password?WiFi passwords are very case-sensitive. The sticker on some routers has the network name (SSID) and a password labeled like WiFi Password, Network Key, or Wireless Security Key. If someone has changed it from what was on the sticker, you can find it in the WiFi settings of a phone or computer that’s already connected to it.
Fix 3: Print the Wireless Network Test Report
Your HP printer may print a report showing its WiFi status, signal strength, and network settings. It can quickly help you find the connection problem.
How to Print It:
- Inkjet With a Screen: Open the Wireless/Network settings and find the reports option.
- Inkjet Without a Screen: Press the Wireless + Information buttons together at once. Some models also use Wireless + Start Copy Black.
- LaserJet: Press and hold the Wireless button for about 10 seconds until the Ready light blinks. Menu models have the report under Wireless.
- Other HP Models: The button combination varies, so you need to check your printer’s control panel or HP guide.
Use the report to check whether the printer has joined your network and whether it reports a connection error.
Fix 4: Restore WiFi Setup Mode
If the printer cannot reconnect, you may need to restore its wireless setup mode. This can reset saved network settings, so check the instructions for your specific model before proceeding.
For Touchscreen Printers:
- Go to Setup/Wireless > Network Settings.
- Select Restore Network Settings and confirm it.
- Wait for about 60 seconds until the Wireless light starts blinking blue.
For Printers Without a Touchscreen:
- Some HP inkjet models use a combination of Wireless and Cancel buttons.
- Other DeskJet, ENVY, Tango, and LaserJet models may require different button sequences.
- Do not use one button combination for every printer.
- Check the official HP guide for your exact model before pressing and holding any buttons.
Important:WiFi setup mode usually stays active for two hours. The duration and setup procedure can vary, so follow the instructions for your printer and complete the connection process promptly.
Fix 5: Connect the Printer to WiFi
Once all the network settings are reset, reconnect your HP printer using one of these methods:
- For Touchscreen Printers:Go to Setup > Network/Wireless > Wireless Setup Wizard, choose your WiFi network, type the password, and wait for the wireless light to turn solid.
- For the HP App:Go to the HP app, click on Add Printer, and follow the on-screen instructions. The printer may need to be in wireless setup mode first.
- Through WPS:If your printer and router support WPS, follow the pairing steps in their manuals. Press the relevant buttons in the specified order and within the required time window. Wait for the printer to confirm the connection.
- Printers Without a Touchscreen:Use a supported setup method provided by HP for your printer model.
Note:WiFi Direct lets a compatible phone or computer connect directly to the printer. It is not the same as connecting the printer to your home router. Do not assume that WiFi Direct or a particular printer IP address can be used to configure your home WiFi on every HP model.
Fix 6: Verify Your Router Settings
If the printer still won’t connect, check these router settings:
- Create 2.4 GHz and 5 GHz networks with separate names if your printer only supports 2.4 GHz.
- Use the WPA2 or WPA2/WPA3 mixed mode instead of WPA3-only.
- Switch off MAC filtering or add the printer to the allowed devices.
- Keep the printer on your main WiFi, not on any guest network.
- Disable AP/client isolation if it is preventing the devices from communicating.
- Update the router’s firmware and restart the printer.
Change only the settings relevant to your problem. If you are unsure about your router’s security settings, contact the router manufacturer or internet provider before changing them.
What If Your HP Printer Is Connected to WiFi but Still Offline?
If the wireless indicator shows a connection, you may not need to reset the printer’s network settings.
Try These Checks First:
- Confirm that the computer or phone is connected to the correct network.
- Check whether the printer is selected as the active printing device.
- Restart the printer and the device you are printing from.
- Check the printer’s status in your computer’s printer settings or the HP app.
- If the problem continues, follow HP’s instructions for troubleshooting an offline printer.
Conclusion
If your HP printer won’t connect to WiFi, the problem can be with the network settings, WiFi connection, or router, not the printer itself. Start with the simple checks, then use the setup and reset instructions designed for your exact printer model. In some cases, resetting the network settings and reconnecting the printer to WiFi makes it work again.
FAQs
Q1: Why is the Wireless Light on My HP Printer Blinking Blue?
Ans:A wireless blinking light means that the printer isn’t connected to a network yet. Check your printer’s model-specific guide to confirm the indicator’s meaning and follow the appropriate connection steps.
Q2: How Long Does the WiFi Setup Mode Last on HP Printer?
Ans: A WiFi setup mode can last for two hours. The exact behaviour can vary by model. If setup mode expires, restore it using the official instructions and try connecting again.
Q3: How can I Connect My HP Printer to WiFi Without the HP App?
Ans:Touchscreen printers can connect through the Wireless Setup Wizard on the control panel. For printers without a touchscreen, check the official HP instructions for the supported setup methods. WiFi Direct is a separate connection option and does not automatically connect the printer to your home router.
Q4: Why Won’t My HP Printer Connect After I Change My WiFi Password?
Ans:The printer may still have the old password saved. Put it into wireless setup mode using the instructions for your model, then reconnect it to your WiFi network using the new password.

