HP Printer Won’t Print? Here’s What’s Going Wrong
Before You Start: Check These Things First
Before trying advanced fixes, check that your printer is switched on, has paper loaded, and shows no obvious error messages. Also, make sure your computer or phone is connected to the correct printer.
If these basic checks don’t help, print a report directly from the printer. This quick test can help you determine whether the problem comes from the printer itself or the device sending the print job.
Here’s How to Check If the Printer Can Print by Itself
Print a report directly from the printer without sending anything from your device. If it prints successfully, the hardware is probably working, and the problem is more likely related to the connections, print queues, or device settings.
Remember that a successful report does not rule out every hardware or print-quality problem. It simply helps narrow down the cause.
The exact steps depend on your HP printer model, so check its user guide if the options below aren’t available.
- On touchscreen models, go to Setup or Settings, click on Reports, and print a Printer Status Report or Print Quality Report.
- On button-only models, select the Information button, usually marked with an “i”. Some models may require a longer press or button combination.
- On LaserJet models, print a Configuration Report or self-test page from the Reports menu or follow the user guide.
If your printer starts printing, focus on the connection, queue, or settings. If it does not work for you, check the paper, ink, jams, error messages, or hardware problems.
How to Fix an HP Printer Not Printing
Fix 1: Clear the Print Queue
A failed document can be stuck at the top of the queue and block everything behind it.
- Go to the print queue and cancel every pending document.
- Wait until the queue is empty.
- Do a quick print test.
- If the print jobs do not clear, restart the HP printer and the device sending the print job.
- Run the diagnostic tool if it is available to you.
On Windows, open Settings, select Bluetooth & devices, then Printers & scanners. Choose your HP printer and open its print queue. On a Mac, open System Settings, select Printers & Scanners, choose your printer, and open the print queue.
If a document remains stuck, check whether printing is paused or the printer is marked offline before sending the same job again.
Additional fix for Windows:If print jobs remain stuck even after restarting your printer and computer, the Windows Print Spooler service may be causing the problem. Press Windows + R, type services.msc, and press Enter. Find Print Spooler, right-click it, and select Restart if the option is available. Then reopen the queue and try printing again. If the problem continues, follow Microsoft’s official troubleshooting guidance before clearing system files manually.
Fix 2: Select the Correct Printer
It is easy to send a document to the wrong printer, especially when you have duplicate or older printer entries.
- Select the print window and search for the printer name.
- Choose the HP printer you use.
- Avoid any duplicate or old printer entries.
- Set the correct HP printer as the default printer if needed.
- Print a test page to confirm that the print command is reaching the right device.
On Windows, open Settings, go to Printers & scanners, and select your HP printer. You may need to turn off “Let Windows manage my default printer” before setting a default manually. On a Mac, select the printer under Printers & Scanners and choose it as the default printer if the option is available.
If several HP printer entries appear, check their names and connection types before removing anything. An older entry may point to a different connection or printer, so confirm which one you actually use.
Fix 3: Check the Wi-Fi Connection
A printer can be powered on but unreachable after a router restart, Wi-Fi password change, or network change.
- Check the Wi-Fi indicator or network information on your printer.
- Make sure the printer and device are using the same network.
- Restart both the printer and the router.
- If needed, try to reconnect it to the correct Wi-Fi.
- If the router gave it a new IP address, repair the old printer connection.
If your HP printer is connected but not printing wirelessly, open the HP app and check the printer’s connection status. A guest network, VPN, or network isolation setting can sometimes prevent your device from communicating with the printer.
For a USB-connected printer, check that the cable is firmly connected at both ends. If possible, try another USB port or a compatible cable before changing the printer’s network settings.
If your printer connects to Wi-Fi but your computer cannot find it, temporarily disconnect any VPN and check whether your router separates devices across different networks. Only change router settings if you understand how they affect your network security.
Fix 4: Check Ink, Cartridges, and Paper Tray
A physical issue can easily stop the printer from printing even when it looks ready. A new cartridge may fail if the protective materials remain attached.
- Look for low-ink, cartridge, paper, or Paper Mismatch warnings.
- Remove a new cartridge and check that all protective tape has been removed.
- Reinstall the ink cartridges firmly according to your model’s instructions.
- If your printer requires all installed cartridges to be functional, replace an empty or faulty cartridge as directed by HP.
- Remove jammed paper carefully and check for torn pieces.
- If pages are blank or streaky, follow the printer’s printhead-cleaning instructions.
Run printhead cleaning only when needed, as it uses ink. Follow the on-screen instructions and avoid repeating the process unnecessarily. If the printer reports a cartridge error, check compatibility and installation before buying a replacement.
Also check that the paper size selected in your print settings matches the paper loaded in the tray. Incorrect paper settings can cause printing interruptions or Paper Mismatch warnings on supported models.
Fix 5: Use the HP Diagnose & Fix Tool
The HP app contains Diagnose & Fix for common printing problems. It can clear stuck jobs, resume paused printing, review the offline status, reconnect the printer, and repair some printing-service errors.
- Install or update the HP app from HP’s official website or your device’s app store.
- Open the app and select your HP printer.
- Find Diagnose & Fix in the printer or diagnostics section, if available.
- Select Start and keep the app open while it runs.
- Apply the recommended fixes, then print a test page.
If the tool cannot detect your printer, confirm that your device and printer are connected properly. Some diagnostic features and menu names may vary by operating system and printer model.
Download the app or check its supported features through HP’s official website. Avoid third-party drivers or repair tools that you cannot verify.
Fix 6: Check Your HP Account
Some HP printer models have account requirements that can stop printing even when the printer is working normally.
- If you use Instant Ink, see whether your payment was declined or your subscription was canceled.
- Confirm that the printer is enrolled correctly if your plan requires any enrollment.
- For HP+ printers, check that the required internet connection is available.
- Review the HP app for account notifications or printer alerts.
Not every HP printer requires an HP account or subscription. Check your specific model and service terms before assuming that an account issue is responsible for the printing problem.
Before changing your subscription or buying a replacement cartridge, read the exact message displayed in the HP app or on the printer. Account restrictions apply only to relevant models and services, so do not assume that every printing failure is subscription-related.
Fix 7: Update or Reinstall the Printer Software
If your HP printer not printing after checking the queue and connection, outdated or corrupted printer software may be the cause.
- Open HP’s official website and find the software or drivers for your exact printer model and operating system.
- Install any recommended driver or software updates.
- Restart your computer and printer, then try printing again.
- If the issue continues, remove and add the printer again using your operating system’s printer settings.
- Avoid downloading printer drivers from unknown third-party websites. The correct software should match both your printer model and operating system.
If the problem began immediately after an operating system or driver update, check whether HP provides a compatible driver for your model. Avoid installing a driver intended for a different printer series, even if the product names look similar.
When the Problem Is Hardware-Related
If the printer cannot print its own report, then software troubleshooting may not solve it properly.
- Look for any recurring Printer Failure or ink-system messages.
- Confirm whether the ink carriage moves normally or not.
- Carefully listen for any grinding, clicking, or other unusual sounds.
- Note whether the same error code appears after every restart or not.
- If the printer shuts off during a job or will not power on, check its power connection and support options.
- If it is under warranty, check it before attempting any repairs.
Do not force the carriage or dismantle the printer to investigate a suspected hardware fault.
A failed self-test, recurring hardware error, or unusual mechanical noise is a reason to stop repeating software fixes. Record the error message or code and provide it to HP website so the issue can be diagnosed more accurately.
Conclusion
When an HP printer won’t print, start the process with a report from the printer. If it works, check the print queue, printer selection, Wi-Fi, cartridges, and the HP app. If the printer cannot print its own report or repeatedly shows a hardware error, professional specialist can be needed. This order will help you avoid unnecessary changes.
Work through these fixes one at a time, testing the printer after each change. This makes it easier to identify the cause without changing settings that were already working.
For the best results, begin with the simplest checks and move to advanced troubleshooting only when needed.
Frequently Asked Questions
Q1: Why is my HP printer connected but not printing anything?
Ans: This happens because a connected printer can still have a stuck queue, wrong printer selection, network mismatch, cartridge issue, or account restriction. Clear the queue and print a report directly from the printer first.
Q2: Why does my HP printer print blank pages?
Ans:Blank pages can be printed when the printer has empty or incorrectly installed cartridges, protective tape left on a new cartridge, or clogged printhead nozzles. Check the cartridges and run printhead cleaning.
Q3: Why is my HP Printer not printing?
Ans:A sudden problem can be due to a network change, router restart, cartridge issue, stuck job, or printer software change. Restart the printer and router, clear pending jobs, and check printer alerts.
Q4: Why does my HP Printer say offline but it is connected?
Ans:Your printer may be connected to Wi-Fi but unavailable to your computer because of a connection problem, an incorrect printer entry, or a paused queue. Check the printer’s network status, confirm the selected printer, and restart the printer and computer.
Q5: What should I do if my HP Printer still won’t print?
Ans:Print the printer’s own status or quality report. If it fails repeatedly, shows a recurring hardware error, makes unusual sounds, or will not power on, contact HP or use available warranty service.
Q6: How do I fix an HP Printer that won’t print from Windows?
Ans: Check the print queue, confirm that the correct printer is selected, and restart the Print Spooler service if jobs remain stuck. If the issue continues, update or reinstall the correct driver from HP’s official website.

